Posts

Showing posts with the label 29 FWD MID FUSE

Section 29 finished

Image
Today I completed the last part of section 29. Only the fresh air vents remains, but those will be completed in section 35. Total time for section 29 ended on 118. Next up is the exiting aft fuselage join. Great to have completed this lengthy section😁 The fresh air vents is only prepared at this stage, and will be attached in section 35.

Good progress on section 29 (mid fuselage side structures)

Image
All parts are prepared (deburred and primed), so it's mostly riveting work left to finish this long and comprehensive section. Next is aft fuselage attachment, and that will be exiting and a milestone. Picture from today. Most of the rivets set on the left side. The side skin was a bit long for my paint booth, so had to use the diagonal. Primed. Some parts are back riveted on before attaching to the fuselage. Mixing ChemSeal (1:10). The small cartridges  are bought from Aircraft Spruce but are intended to mix all at once. That gives a lot of waste, so I tried to mix it manually on my scale. It works great and eases the work were sealant is required. 

Section 29 progress

Image
I've completed section 29-02 to 29-07 and is working on 29-08 (attaching the skin and cowling). In addition parts have been deburred and primed ahead.  The control column assembly is in place. It took some time to get the shims correctly. Lower logeron were the engine mount will be attached. The upper longeron must be twisted 10 degree. Parts primed but needed some touch up. I decided to fabricate a trolley with wheel, to easily be able to move the fuselage in and out of the container. I also made a ramp (not shown on the picture) The left side skin is hang on.

Start of section 29 Forward fuselage side structure

Image
I've started on section 29, and it seems like a comprehensive but exciting section. Quite quickly the two forward fuselage section comes together.