Posts

Showing posts with the label 40 Landing gear and engine mount

Landing gear

Image
Finally I was ready to install the landing gear. I have postponed that as long as possible. I put the fuselage on a custom temporary table.   I had to adjust the more toe in on the right wheel.  So ordered 2 pc. U-00013B from Vans. They are 0.5 degree each, and I put both on the right side for a total of 1 degree. There was a problem with the hole alignment on the nose gear leg. Vans sent me a new one. The old one cut in two🤔 As requested by Vans.

Engine, propeller and rest of FWF kit arrived!

Image
The engine, propeller and rest of the firewall forward kit arrived today. The cheapest freight options turned out to be air freight at about 2400USD. So it took only a abit more than a week to arrive. Lycoming Thunderbolt IO-390 EXP119 with 2xEmag igntion.  

Engine, instrument panel, flap cowl, fire extinguisher, wheels and SB-00027

Image
The engine has finally arrived at Vans Aircraft and is awaiting crating together with the propeller and remaining part of the FWF (Firewall Forward) kit. I don't know when that will happen, but hopefully within a couple of weeks. So I don't expect it to arrive before March. Otherwise a lot small projects has been going on. The instrument panel has been painted, but I had to give up on the Decalpro FX system (https://decalprofx.com/) because is was to difficult to get consistent results. So I've ordered dry transfer from https://modelshop.co.uk/Static/WorkShop/Dry-Transfers. Hopefully it will work out better so I can complete the instrument panel. This is the exit door (cowl flap) that is a part of the EXP119 engine enhancement project. The fire extinguisher (A620T) mounted on the "Power Module kit". I've started to prepare the landing gear, and that involves assembling the wheels. This is the gear brace where the gear leg will be attached to. Service bulletin ...