Sindres RV-14A

The paint booth is now set up, and I primed the top cowling, empennage fairing and the oil door just to check that it's working. It does, but the outside temperature has been around 10-12C, so I have to use a propane heater. Next is to try the top coat on the same parts (Stewarts Systems EcoCrylic).

The empennage fairing had to be completed, so I did install all the tail surfaces and did the final adjustments.

 After 2 weeks on holiday I proceeded with more engine related items. The backup alternator had to be installed. I decided to remove the right mag to get access to the difficult lower left bolt. At the same time I rotated the mag a bit more clockwise, to have access to the electrical connector on the mag. Also the oil cooler, air filter and baffle has ben completed. The backup alternator (B&C BC410-H) is a bit difficult to get attached because the nut on the lower left side is very difficult to get access to. Removing the mag made it easy.  The picture show after the mag is back in. The oil return tube had to be modified slightly to not interfere with the Snorkel.  The alternate air emergency door.