Sindres RV-14A

I finished riveting both left and right outboard leading edge today. Landing light lens and installation to main spar remains. Both done and ready for installation on main spar. The stall warning. Legg til bildetekst The landing light compartment is painted black. Ready for rivets. Dimpling. The C-frame had no problem reaching all holes.

 Section 14 Wing Ribs is no as complete as possible before I get the missing flap hinge ribs. Also section 17 rear spar is ready, and will be attached to the main ribs as soon as they are ready. I'm sing the standard Molex connector in the wing root, instead I use 14 pins CPC from TE-Connectivity (par #183040-1) I divided the priming in two batches. The attach hole has to be reamed precisely at 3/8". The inboard aileron hinge with service bulletin 16-03-28 applied.